Mixing Console (5)

The Music Telegraph | Text 2019/04/09 [12:43]

Mixing Console (5)

The Music Telegraph| 입력 : 2019/04/09 [12:43]

Mixing Console (5)

 

▲ 3 sections of mixing console

© The Music Telegraph

 

*From the top picture ((1), (2))..

 

(1) Monitor Master Fader: Receives signal from the monitor panpot = L + R pan.

 

▲ Monitor master fader (Monitor output) in Pro Tools mixer



 

(2) Control Room Monitor Master Fader: To set Control Room level (85 ~ 90dB SPL)

- Dim Switch: Lowers level a set # of dB

- Master Monitor: Aux master level controls; one for every Aux sends

- Aux returns: usually at least 4 returns from a major reverb device

- Level Control: when up, feeds directly to master fader

- Pan: For L + R

- Mute switch

- Solo switch

- Small level control: to send to another Aux; to go to headphone cue system

 

▲ An example of Control room monitor master setup. Use any number of audio faders to feed your mix bus (in this example 'Bus 1-2'). Use one MASTER fader to control your mix. Use AUX faders to add paths to the hardware outputs connected to your amps/monitors. Add one AUX fader for your control room talk-back back mic & feed this to your cue mix.   

© Auricula



 

Comment
  • 도배방지 이미지


광고
광고
Audio Engineering (popular articles)
광고
광고
광고
광고
광고
광고
광고
광고
광고
광고