Brass Settings for Recording

The Music Telegraph | Text 2019/07/15 [15:51]

Brass Settings for Recording

The Music Telegraph| 입력 : 2019/07/15 [15:51]

▲ Brass EQ Setting in Pro Tools

© The Music Telegraph



 

Brass Settings for Recording

 

1. EQ chart for Brass recording

Frequency Range Characteristics
Below 200 Hz

Boom

*Cut this area of frequency using High Pass Filter to reduce masking with bass, kick drum, or vocals

2 kHz

Presence

*Boost this area of frequency to improve presence

5 kHz

Brightness

*Boost this area of frequency if you want bright sound of brass instruments

8 kHz -      

Noises

*Cut this area of frequency using Low Pass Filter if you don't want noises from performer's key click or reed vibration 

 

 

 

 

2. Compression settings for Brass recording

Parameters Characteristics
Attack time

Fast

*If attack time is too fast then the compressor may kill the transient of brass sound so make the sound dull

Release time

Medium to Fast

*It depends on Tempo. The tempo is slower, the release time is longer (vice versa).

Ratio

3:1

*You can adjust ratio setting depend on the dynamics of the music

(More dynamics, higher ratio / Vice versa)

Threshold

- 10 dB ~

*You can lower threshold level if you want more compressed sounds. (In this case, you'll lose dynamics of brass   sounds)

 

 

 

 

Comment
  • 도배방지 이미지


광고
광고
광고
광고
광고
광고
광고
광고
광고
광고